HobbyWireless
T905 TRANSMITTER 900 MHZ 500 MW
Details:, It's not the same cheap technology sold over the internet. With this transmitter you will get what you pay for., Channels:, , Transmitter Specs:, -RF Output Power 500 mW, Note:, All transmitters shipped to any addresses within US territory will have only the Channel 1 (910 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
It uses PLL technology, very tiny and so light weight ...HobbyWireless
T1012 TRANSMITTER 1.2 GHZ 1000MW - LAWMATE - ALSO AVAILABLE TO USA CUSTOMERS
| Weight | 30g (transmitter only) |
| Transmission power 50-ohm load CH1 Vcc = 12V | 30dBm |
| Nominal output impedance | 50 ohms |
| Operating voltage | Vcc, 10.5V (minimum), 12V (typical), 13V (maximum) |
| Supply current Vcc = 12V | 450mA (typical), 500mA (maximum) |
| Video input voltage 75-ohm impedance | 1Vp-p |
| Audio input voltage 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
| Storage humidity | 10 to 80% |
| Dimension and weight Excluding SMA connector | 50 x 26 x 13mm, 20g |
| to see the transmitter and camera connections. Note | BNC to RCA adpater is sold separately in accessories. |
Details:, This transmitter is a power house, providing a 1000 miliwatts of pre RF output. It is the best transmitter for long range applications. (for RC models is recommended to install the T1012 as far as possible away from the models receiver) Even with all that power, it weights only around 1oz 30 grams . With all this, and the right setup, for sure you can get video reception miles away. It is highly recommended to install the transmitter in ventilated areas, to allow the air to keep it cool. As any of our transmitters, T1012 has digital Phase-Lock-Loop circuit avoiding frequency drift, providing a stable and solid audio and video delivery. You can not go wrong with it., Features:, , Specifications:, , Standard shipping package:, , Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
Click here for Specs 1000mW RF output power Eight (8) ...HobbyWireless
FAT SHARK BASE SD VGA VIDEO GLASSES
| FOV (field of view) | 35°diagonal (Image size |
| Interpupillary (IPD) distance | 59 – 69 mm (adjustable) |
| Supports optional diopter lens inserts | -2, -4, -6 dpt |
| User Controls | Contrast/ brightness control |
| Power supply | 7 - 13 V (2S/3S Lipo Battery) |
| Power consumption (@7.4V nominal) | 150mA |
Details:, Built for serious FPVer’s, the new BASE SD goggle is the only choice for tethered video piloting., Headset Specifications:, , Optics:, Audio:, Stereo (requires adjustable volume earphone accessory), Electrical:, Mechanical:, Ergonomic molded headset w/ adjustable headband, Weight:, 120g (not including cable), Display:, Full color LCD LED backlit Kopin CyberDisplay, Head Tracker:, None, Interface:, Futaba Square 6pin AV in port (Vin, GND, AudR, AudL, Vid),
The BASESD has dedicated tooling for a smaller, sleeker profile ...HobbyWireless
FAT SHARK ATTITUDE SD FPV VIDEO GLASSES + TRANSMITTER KIT
| Power consumption at 7.4V | wired 150mA, wireless 300mA(wired/wireless) |
| Operating Frequencies | 5740 MHz, 5760 MHz, 5780 MHz, 5800 Mhz, 5820 MHz 5840 Mhz 5860 MHz |
| Power required | 7 - 13 V (2S/3S lipo battery) plug |
| Adjustable interpupillary distance | 59 - 69 mm. |
Details:, The Attitude SD came to stay., Specifications:, -90dBm 5.8G 7 channel receiver (new rx AWRX682), Includes:, 1x Attitude SD headset,
Based on the success of it's predecessors the Attitude SD ...HobbyWireless
IMMERSIONRC 600MW 5.8 GHZ TRANSMITTER V2 - FATSHARK COMPATIBLE
| - Frequencies | 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz |
| - Weight | 24 grams (0.9oz) |
| - Size | 57 x 34mm |
| - Input power | 2.2W |
Details:, The new V2 transmitter came out even smaller compared to the old design. It will boost the range of Fatshark RCV922 set for about 1-2 miles (2-3km)., Specs:, - 600mW (28dBm, +/- 1dB) of clean output power, - Input voltage range:, 6-25V input voltage, 2S-6S LiPo compatible, Package includes:,
It's designed by ImmersionRC team, with 5.8 GHz 600mW transmitter ...HobbyWireless
HORNET OSD + GPS KIT
| For FY-21AP | Fixed Altitude flying mode; for FY-3ZT/FY-31AP |
| GPS speed (Unit | km/h) |
| Current latitude and longitude of the plane (Format | “dddmm.mmm” ) |
| The angle of turning to the return point (Unit | deg) |
| Total flight time (Format | “mm.ss”) |
| Course angle of flight (Unit | deg) |
| (Unit | mA / h) |
| Climb rate (Unit | m/s) |
Details:, The Hornet- OSD overlays flight telemetry information onto your video image. The telemetry information displayed includes flight altitude, flight speed, flight direction, and home direction and so on. You also can save the telemetry information to a MICRO SD card (, The telemetry data is as below:, , Relative altitude (Unit : m), Operating temperature(Unit: ℃), Distance to take-off Point (Unit : m), The battery voltage of the video transmitter (Unit: V), Power battery voltage (Unit: V), Power battery current (Unit: A), The OSD can be controlled to show different display information via one spare channel of your radio Rx. There are 5 optional display modes controlled by the different PWM signals. You can use default mode if you do not want to change the display modes.(the 5 modes separately are as following: A. All Information Displayed; B., The modes are shown as below:,
sold separately ), then realizing trace playback via FYGCS. The ...HobbyWireless
VC8145 DMM BENCH TOP DIGITAL MULTIMETER METER WITH PC VIEW SOFTWARE
| Maximum Voltage between any terminal and earth ground | 1000 V RMS |
| Continuity Beeper | approx. 3 kHz |
| Display | Double Digital |
| Bar Graph | 23 segments, update 40 times/second |
| Electromagnetic Compatibility | in a RF field or 1 V/m on all ranges and function except Capacitance |
| PC Interface | RS-232 |
| Operating Temperature | 0 ~ 50 °C (32 ~ 122 °F) |
| Storage Temperature | -20 ~ 60 °C (-4 ~ 140 °F) |
| Operating Altitude | under 2,000 m (6,562 feet) |
| Storage Altitude | under 10,000 m (32,808 feet) |
| Relative Humidity | ≤ 75 % at 0 ~ 40 °C (32 ~ 104 °F) |
| Battery Type | 9V DC Adapter |
| AC Power | 100 ~ 240 V (US / EU / AU / UK Power adapter plug) |
| Safety and Compliance | IEC 61010, CAT II 1000 V, CAT III 600 V |
| Item Size | approx. 242 (L) x 209 (W) x 92 (D) mm (9.53 x 8.23 x 3.62 inch) |
| Item Weight | approx. 1382 g (48.7 oz) (accessories excluded) |
Details:, This is a high performance bench DMM (Digital Multi Meter) with more than 50 measuring functions including DC/AC Voltage, DC/AC Currents, Resistance (Ω), Capacitance, Frequency (Hz), Rotational Speed, Square Waveform, Temperature (°C/°F), Duty Cycle, Diode and Continuity Check., Total Accuracy: specified +5% of range Capacitance not specified in RF fields performance above 1 V/m is not specified,
You can connect VC8145 to your computer through RS-232 Cable.The ...HobbyWireless
DJI WOOKONG MULTI (WK-M) MULTIROTOR CONTROLLER WITH GPS
| Built-In Functions | Autopilot, Auto Hover Fail Safe |
| Multi Rotor Types | Quad-Rotor, Hex-Rotor, Octo-Rotor |
| Supported ESC output | 200Hz refresh frequencys |
| Recommended Transmitter | PCM or 2.4GHz with minimum 5 channels and Failsafe function available on all channels |
| Recommended Power Supply | DC 4.8 ~ 12V |
| Power Consumption | MAX 5W (0.9A@5V, 0.7A@5.8V,0.5A@7.4V,0.4A@8V) |
| Hovering Accuracy | Vertical |
| Suitable Wind Condition | < 8m/s (17.7mph) |
| Max Rotate Angle | 30° |
| Vertical Speed | 3m/s |
| Total Weight | <= 150g |
| Dimensions | Main Controller |
| IMU | 40mm x 31mm x 26mm |
| GPS & Compass | 50mm (diameter) x 9mm |
| LED Indicator | 25mm x 25mm x 7mm |
Details:, , Features:, , Operating Temperature: -5°C to +60°C (You have to keep the IMU warm if you want to use it under low temperature, could be -5°Cor lower.),
DJI Wookong Multi-Rotor stabilization controller is a complete flight system ...HobbyWireless
8" INCHES LCD-LED MONITOR CUSTOMIZED FOR FPV (SCREEN NEVER GOES BLUE OR BLACK) - OPEN BOX
| Model | EV-8 |
| Screen | 8" inches TFT LCD LED Backlit |
| Dimensions W x H x D | (209 x 147 x 35mm) 8.2" x 5.78" x 1.37" |
| Viewing Angle | 70°/70°(L/R) 40°/50°U/D |
| Contrast Ratio | 500 |
| Weight | < 650 gr (1.35lb) |
| Resolution | 800 x 400 pixels |
| Brightness | 450cd/m2 |
| Audio input | 1 (mono) |
| Input Singal | RCA Video |
| Color System | PAL/NTC/SECAM (manually selected by the user) |
| Operating Voltage | Input 6-18VDC (2s-4s lipo battery can be used) |
| Working Temperature | -20℃～60℃ |
| Storage Temperature | -30℃～70℃ |
| Manufacturer Warranty | 90 days |
Details:, , Specifications:, Video input: 1, Power Consumption: 7W, Includes:, 8" Monitor,
This is an "Open Box" monitor. Customer returned it, it's ...HobbyWireless
DJI 900 MHZ DATALINK + WKM MAP VIEW SOFTWARE
Details:, The Data Link to gives us the access to control your Multirotor remotely using a LapTop., DJI offers 2.4Ghz and 900MHz datalink to achieve long-range two-way communication. The datalink maximum distance is up to 15km. The ground end also link with USB power supply that is convenient for outdoor using. The wireless module uses FHSS technology which is verified by FCC and CE certification, DJI datalink has many advantages such as: high data rate, stable performance, strong anti-interference capability, and long communication distance. The 2.4GHz datalink’s power consumption is 550mw and 900MHz datalink 1.5W, which is big advantage for long-distance flight mission., Note:, No license is required to purchase it, however i, Disclaimer:, Hobby Wireless is not responsable for any damage, loss or illegal operation. It will be totally the user's responsibility to use this device legally and safetly.,
The Click-2-Go mode allows you to choose a point on ...HobbyWireless
DJI 2.4 GHZ DATALINK + WKM MAP VIEW SOFTWARE
Details:, The Data Link to gives us the access to control your Multirotor remotely using a LapTop., DJI offers 2.4Ghz and 900MHz datalink to achieve long-range two-way communication. The datalink maximum distance is up to 15km. The ground end also link with USB power supply that is convenient for outdoor using. The wireless module uses FHSS technology which is verified by FCC and CE certification, DJI datalink has many advantages such as: high data rate, stable performance, strong anti-interference capability, and long communication distance. The 2.4GHz datalink’s power consumption is 550mw and 900MHz datalink 1.5W, which is big advantage for long-distance flight mission., Note:, No license is required to purchase it, however i, Disclaimer:, Hobby Wireless is not responsable for any damage, loss or illegal operation. It will be totally the user's responsibility to use this device legally and safetly.,
The Click-2-Go mode allows you to choose a point on ...HobbyWireless
PARKFLYER SWITCH-MODE BEC
| Model | ParkBEC |
| Specifications | Input voltage |
| Output current | 1.25A continuous, 1.5A 60 second peak. (6 4-9g servos, 4 standard servos) |
| Weight | 6.2g/.22oz |
| Weight Without Wires | 4.1g/.14oz |
| Applications | Parkflyers |
Details:, , Description:, The ParkBEC is the smallest and lightest switch-mode BEC on the market. ParkBEC powers your receiver and servos much more efficiently than a standard BEC. As many as six sub-micro servos can be powered without worrying about an overheating BEC. ParkBEC works great up to very high voltages, and is especially suited for running parkflyer type aircraft. ParkBEC is often a necessity at 4s and above., Guide:, How to move between airplanes, Datasheet:, Installation guide.doc,
Many people don't realize that their ESC's BEC rating is ...HobbyWireless
MINI COOLING FAN 25X25MM
| Specs | Power |
| Current | 0.08 Amps |
| Size | 25x25mm (1x inch") |
Details:, This mini cooling fan is perfect to keep your transmitter cooler keeping your wireless units healthy and incresing the life spam.,
It's a very low power consumption 0.08 Amps, a 500mA ...HobbyWireless
ASR-10 - ADJUSTABLE SWITCHING REGULATOR
Details:, The ASR-10 is the adjustable version of our step down voltage regulators. It is designed to be the easiest possible way to add an adjustable voltage source to a new or existing project with all the efficiency benefits of switch-mode power. The ASR-10 is pin-compatible with the common 78XX family of linear voltage regulators, and has a small screw on top that allows you to change the output voltage as your project evolves. It has integrated decoupling capacitors, so external capacitors are not generally necessary., Model:, , Performance:, , Applications:,
ASR-10 can deliver a maximum of 10 Watts. The screw ...HobbyWireless
HORNET OSD + FY-31AP FLIGHT STABILIZER SYSTEM, GPS AUTO-PILOT FUNCTIONS
| Inputvoltage | 4.0 ~ 6.0 Volt; |
| Currentdraw | 50mA (5V); |
| Size | 47x 27x 20 mm; |
| Weight (excluding wires) | 25g; |
| Temperature range | -25 ° C ~ +70 ° C; |
| Maximum rate of rotation | ≤ 2000 ° /s |
| Input voltage | 3.0 ~ 3.3 Volt; |
| Currentdraw | 60mA (3.3V); |
| Size | 32 x32x 10 mm; |
| Weight (excluding wires) | 22g; |
| Temperature range | -25 ° C ~ +70 ° C; |
| For FY-21AP | Fixed Altitude flying mode; for FY-3ZT/FY-31AP |
| GPS speed (Unit | km/h) |
| Current latitude and longitude of the plane (Format | “dddmm.mmm” ) |
| The angle of turning to the return point (Unit | deg) |
| Total flight time (Format | “mm.ss”) |
| Course angle of flight (Unit | deg) |
| (Unit | mA / h) |
| Climb rate (Unit | m/s) |
Details:, FY-31AP, By using your remote control, the FY-31AP can be turned on or off for the following functions:, , The FY-31AP provides an optional upgrade combining with the FY-OSD and the Data Radio. With this add-on, you will receive:, , • FY-31AP module:, , • GPS module:, , The FY-31AP can be installed in the following aircraft :, , Any other configuration , please e-mail us for enquiry:, service@feiyu-tech.com, The FY-31AP has been tested to work with the following RC systems:, , The telemetry data is as below:, , Relative altitude (Unit : m), Operating temperature(Unit: ℃), Distance to take-off Point (Unit : m), The battery voltage of the video transmitter (Unit: V), Power battery voltage (Unit: V), Power battery current (Unit: A), The OSD can be controlled to show different display information via one spare channel of your radio Rx. There are 5 optional display modes controlled by the different PWM signals. You can use default mode if you do not want to change the display modes.(the 5 modes separately are as following:, , The modes are shown as below:,
Attitude Flight Stabilization System (AFSS) 1. Attitude Flight Stabilization System ...